Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX8120P - Asia - (PPE+PA*)-GF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX8120P - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
NORYL GTX™ 812OP resin is a 20% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This extrudable grade has excellent chemical resistance and high heat resistance. . NORYL GTX8120P resin is anodizable, has low thermal conductivity and is an excellent candidate for extruded thermal break applications.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 12 cm³/10min ISO 1133
Temperatura 280 °C -
Carga 10 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 6800 MPa ISO 527
Tensão no escoamento 125 MPa ISO 527
Deformação no escoamento 3 % ISO 527
Tensão na ruptura 125 MPa ISO 527
Deformação na ruptura 3.5 % ISO 527
Módulo de flexão 5000 MPa ISO 178
Res. impacto Charpy c/entalhe, +23°C 8 kJ/m² ISO 179/1eA
Res. impacto Izod c/entalhe, +23°C, 4mm 7 kJ/m² ISO 180/1A
Res. impacto Izod c/entalhe, -30°C, 4mm 6 kJ/m² ISO 180/1A
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica , 0.45 MPa 240 °C ISO 75-1/-2
Temperatura de amolecimento Vicat, B 235 °C ISO 306
Temperatura de amolecimento Vicat, 120°C/h 50N 235 °C ISO 306
Coef. de expansão térmica linear, paralelo 35 E-6/K ISO 11359-1/-2
Coef. de expansão térmica linear, perpend. 75 E-6/K ISO 11359-1/-2
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 2.5 % Sim. to ISO 62
Absorção de umidade 1 % Sim. to ISO 62
Densidade 1240 kg/m³ ISO 1183
Características
Processamento
Extrusão de perfis
Disponibilidade regional
Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.